Home Products Weighbeam Scales Avenger R310 Weighbeams in Mild Steel
Avenger R310 Weighbeams in Mild Steel PDF Print E-mail

Weighbeams Mild Steel - Basic R310 Industrial Indicator
Capacity 3000kg x 0.5kg graduation with a high Accuracy Scale 0.1% of the applied load. The Euroscales Weighbeams are designed for portability and can be re-sited and up and running again in minutes.

Their low profile design make them especially easy to load by manual hand pallet trucks. The R310 is a digital weighing indicator ideal for use in platform scales and simple weighing applications where the display of weight is the primary requirement. It is fully trade approved under OIML and NSC to 4,000 divisions. The unit's software is run from flash memory and can be upgraded in the field using the rin-link connection Powering options include: 12-24VDC or 4 AA batteries. It can be panel, desk, wall mounted or mounted on a stand.
Weighbeams with cablesAvenger display R310

Display Performance
Resolution Up to 30,000 divisions, minimum of 0.25mV/division, 20 updates/second (Trade 4000 divisions at 0.8mV/division)
Zero Cancellation ±2.0mV/V
Span Adjustment 0.1mV/V to 3.0mV/V full scale
Stability/Drift Zero: < 0.1uV/°C (+ 8ppm of deadload max) / Span: < 8 ppm/°C, Linearity < 20ppm, Noise < 0.2mVp-p
Excitation 5 Volts for up to 4 x 350 ohm load cells (4 wire or 6 wire + shield)
A/D Type 24 bit Sigma Delta with 8,388,608 internal counts
A/D Conversion rate 20Hz with FIR filtering > 80dB
Operating Environment Temperature: -10 to +50°C ambient, Humidity: < 90% non-condensing
Digital
Display LCD - six 20mm high digits plus units and annunciators - LED Backlight
Setup and Calibration Full digital with visual prompting in plain messages
Digital Filter Sliding window average from 0.1 second to 4.0 seconds
Zero Range Adjustable from ±2% to ±20% of full capacity
Power Input
Standard 12 to 24VDC (2.5 VA max) - ON/OFF key with memory feature
Variant - AC AC Plug pack: 110/240VAC 50/60Hz in - 12VDC 0.5A out
Variant - Battery 4 x AA batteries (Rechargeable 2.5 Ah NiMH)
Features
rin-LINK data coupling I.R. Data Coupling for optional rin -LINK cable (to RS-232 PC port)
Approvals OIML (TC6242, T6244), NSC (S420), CE, FCC, C-Tick
Weighbeams

 

Load cells IP67 sealed stainless steel load cells—Flintec
Standard finish Smooth steel finish / high quality paint finish in blue grey RAL 7031
Construction Heavy duty folded mild steel construction
Size 1200mm long + handle, width 120mm, height 60mm
Cables standard cables 2.5M length with Amphenol plugs
Warranty 12 Months on loadcells
Feet Weights and Measures certified loadcell mounts, passive zinc plated
 
Copyright © 2024 euroscales.com. All Rights Reserved.
Joomla! is Free Software released under the GNU/GPL License.